Gedore Red Tool set in foa, modules 166pcs

Description

• Socket wrench tools:
• Coupler in acc. with DIN 3120, ISO 1174, with ball locking device
• Square drive Conforms to DIN 3120, ISO 1174, with ball retention groove
• Chrome-vanadium-steel, matt satin chrome-plated
• 2C reversible ratchet 1/4″: To DIN 3120 – A 6.3, ISO 1174, lever for right and left-hand operation, push button release, fine-toothed, oval form, dual-material handle
• Square plug-in handle 1/4″:
• 1-component handle with in-hex
• Socket 1/4″ hexagon: Metric, short, to DIN 3124, ISO 2725
• Screwdriver bit socket 1/4″ for in-hex screws: Pressed-in, phosphated pin
• Screwdriver bit socket 1/4″ slotted, PH, PZ, TX with drill hole: Pressed-in, phosphated pin
• Socket extension 1/4″:
• Sliding T-handle with slide 1/4″: Conforms to DIN 3122, ISO 3315
• Universal joint 1/4″: Joint bolted on, design to DIN 3123 – C 6.3
• 2C reversible ratchet 1/2″: To DIN 3120 – A 12.5, ISO 1174, lever for right and left-hand operation, push button release, fine-toothed, oval form, dual-material handle
• Socket extension 1/2″:
• Sliding T bar 1/2″, with slide, to DIN 3122, ISO 3315
• Universal joint 1/2″: Joint bolted on, design to DIN 3123 – C 12.5
• Socket, hex: Metric, short, to DIN 3124, ISO 2725
• Screwdriver bit socket 1/2″ for in-hex screws: Pressed-in, phosphated pin
• Ratchet wrenches: Based on DIN 3113, ISO 3318, ring offset 15°, reversible for right and left-hand operation, 15° jaw position, surface matt satin chrome-plated
• Hexagon socket key set: To DIN ISO 2936, hardened throughout, phosphated
• Chrome-vanadium steel
• Flat ring spanner: To DIN 838, ISO 3318, ISO 1085, ISO 10104, 5° offset, chrome vanadium steel, surface matt satin, chrome-plated
• Water pump pliers: To DIN 8976 Form C, lengthways-serrated gripping surfaces, box joint, 7 settings, chrome vanadium steel, powder-coated
• Combination pliers: To DIN ISO 5746, inductively hardened cutting edges, dual-material handle, forged
• Bent nose telephone pliers: To DIN ISO 5745, straight gripping surfaces, lengthways-serrated, inductively hardened cutting edges, dual-material handle, forged
• Side cutters: To DIN ISO 5749, slender head, inductively hardened, long cutting edges, dual-material handle, forged
• Circlip pliers: To DIN 5254 Form A, straight precision tips, opening spring, DIN 471 for retaining rings, DIN 983
• To DIN 5254 Form B, angled precision tips, opening spring, DIN 471 for retaining rings, DIN 983
• To DIN 5256 Form C, straight precision tips, opening spring, DIN 472 for retaining rings, DIN 984
• To DIN 5256 Form D, 90° angled precision tips, DIN 472 for retaining rings, DIN 984
• Dipped handle protectors
• Chrome-vanadium steel
• Engineers’ hammer: Forged hammer head of tempered steel, inductively hardened striking surfaces, to DIN 1041, ash handle, paint-coated shaft end, ring wedge
• Flat cold chisel, flat oval: To DIN 6453, cutting edge and head ground, impact end tempered, chrome-vanadium steel
• Cross-cut chisel, flat oval: To DIN 6451, cutting edge, sides and head ground, impact end tempered, chrome-vanadium steel
• Hexagonal punch: To DIN 6458, impact end annealed, chrome-vanadium steel
• Centre punch, hexagonal: To DIN 7250, impact end annealed, chrome-vanadium steel
• Pin punch, octagonal: To DIN 6450, impact end annealed, chrome-vanadium steel
• 2C screwdriver: Slot and cross-slotted PZ, to DIN, high-grade chrome-molybdenum steel blade, chrome-plated, phosphated driven tip, dual-material handle, 5-edge grip head, elongated hole in handle
• 2C screwdriver TX: Chrome-molybdenum steel blade, chrome-plated, phosphated driven tip, dual-material handle, 5-edge grip head, elongated hole in handle
• Digital measuring calliper: LCD display, reset setting, precision roller adjustment, mm/inch changeover, ground tips, in box incl. spare battery, operating instructions, PC interface, locking screw, thread table on the back
• Clamp locking plier: Lengthways-serrated grip surfaces, setting screw and release lever, one-hand operation, surface chrome-plated, chrome vanadium steel
• Half-round file: To DIN 7261, dual-material handle, hands-friendly transfer of force, hole for hanging up
• Tape measure: ABS dual-material housing, clip, nylon-coated tape, mm-graduation, with tape rewind and lock, magnetic stop, Accuracy Class II
• Utility knife: Blade 25 mm, synthetic housing, metal blade guide, one-handed operation, 5 spare blades
• (De)magnetizer: Magnetizer for bolting and gripping tools, demagnetizer for tools
• Feeler gauge set: Protective handle, folding, blades tapering to a cone, of hardened spring steel
• Bit box: Drive adapter with magnetic bit locking, hexagon drive to DIN 3126 ISO 1173 – C 6.3, machine operated, phosphated, plastic box